@article{3120299,
    title = "Safety and efficacy of absorbable and non-absorbable fixation systems for intraperitoneal mesh fixation: an experimental study in swine",
    author = "Kapoulas, S. and Papalois, A. and Papadakis, G. and Tsoulfas, G. and Christoforidis, E. and Papaziogas, B. and Schizas, D. and Chatzimavroudis, G.",
    journal = "Revista Hispanoamericana de Hernia",
    year = "2021",
    publisher = "Springer-Verlag Italia s.r.l.",
    issn = "2255-2677",
    doi = "10.1007/s10029-020-02352-x",
    abstract = "Purpose: Choice of the best possible fixation system in terms of safety and effectiveness for intraperitoneal mesh placement in hernia surgery remains controversial. The aim of the present study was to compare the performance of four fixation systems in a swine model of intraperitoneal mesh fixation. Methods: Fourteen Landrace swine were utilized in the study. The experiment included two stages. Initially, four pieces of mesh (Ventralight ™ ST) sizing 10 × 5 cm were placed and fixed intraperitoneally to reinforce 4 small full thickness abdominal wall defects created with diathermy. These defects were repaired primarily with absorbable suture before mesh implantation. Each mesh was anchored with a different tack device between Absorbatack™, Protack™, Capsure™, or Optifix™. The second stage took place after 60 days and included euthanasia, laparoscopy, and laparotomy via U-shaped incision to obtain the measurements for the outcome parameters. The primary endpoint of the study was to compare the peel strength of the compound tack/mesh from the abdominal wall. Secondary parameters were the extent and quality of visceral adhesions to the mesh, the degree of mesh shrinkage and the histological response around the tacks. Results: Thirteen out of 14 animals survived the experiment and 10 were included in the final analysis. Capsure™ tacks had higher peel strength when compared to Absorbatack™ (p = 0.028); Protack™ (p = 0.043); and Optifix™ (p = 0.009). No significant differences were noted regarding the extent of visceral adhesions (Friedman’s test p value 0.854), the adhesion quality (Friedman’s test p value 0.506), or the mesh shrinkage (Friedman’s test p value = 0.827). Four out of the ten animals developed no adhesions at all 2 months after implantation. Conclusion: Capsure™ fixation system provided higher peel strength that the other tested devices in our swine model of intraperitoneal mesh fixation. Our findings generate the hypothesis that this type of fixation may be superior in a clinical setting. Clinical trials with long-term follow-up are required to assess the safety and efficacy of mesh fixation systems in hernia surgery. © 2021, The Author(s), under exclusive licence to Springer-Verlag France SAS part of Springer Nature."
}